Bullet Casing Mold | |
---|---|
Basic Information | |
Removed: Alpha 13 | |
Group | Forging/Molds |
Category | Mold |
Scrapping/Forging Properties | |
Meltable | No |
Combustible | No |
Description[]
A Bullet Casing Mold is a craftable item that is placed in to a Forge and used to cast Brass into a Bullet Casing. Due to the fact a Bullet Casing Mold is not affected by durability it will not suffer any damage and will last indefinitely. As with all molds it will only accept scrap items with the correct type of base material, in this case brass. For a current list of all brass based items check the page Brass. A Bullet Casing Mold cannot be scrapped, dismantled or melted in a Forge.
Usage[]
Along with a source of brass and a Combustible fuel, a Bullet Casing Mold is used by placing it into the Mold slot in a Forge. Once the mold has been placed into its slot the Metal slot will accept items of the correct type of material. Place the metal item you intend to melt into the Metal slot and place your fuel source into one of the three Fuel slots. The casting process will begin and the Bullet Casing Mold will be used to cast a Bullet Casing.
Unlocking[]
Before you can craft a Bullet Casing Mold the recipe must be unlocked, this is done by reading the required recipe book.
Crafting[]
Required Item[]
It is very easy to craft a Bullet Casing Mold and you will require the following items to do so.
- 5x Lump of Clay
- 1x Bullet Casing
Crafting Recipe[]
You can craft a Bullet Casing Mold by using the recipe below.
1 | ||||||
1 | 1 | 1 | ||||
1 | 1 | 1 | ||||
Crafting time: 0:05 |
Notes[]
- If the mold is removed from the forge during casting it will cause the current part that is being cast to disappear and you will lose the metal already used by it.