| Bullet Tip Mold | |
|---|---|
| |
| Basic Information | |
| Removed: Alpha 13 | |
| Group | Forging/Molds |
| Category | Mold |
| Scrapping/Forging Properties | |
| Meltable | No |
| Combustible | No |
Description[ | ]
A Bullet Tip Mold is a craftable item that is placed in to a Forge and used to cast Scrap Lead into a Bullet Tip. Due to the fact a Bullet Tip Mold is not affected by durability it will not suffer any damage and will last indefinitely. As with all molds it will only accept scrap items with the correct type of base material, in this case lead. For a current list of all lead based items check the page Scrap Lead. A Bullet Tip Mold cannot be scrapped, dismantled or melted in a Forge.
Usage[ | ]
Along with a source of lead and a Combustible fuel, a Bullet Tip Mold is used by placing it into the Mold slot in a Forge. Once the mold has been placed into its slot the Metal slot will accept items of the correct type of material. Place the metal item you intend to melt into the Metal slot and place your fuel source into one of the three Fuel slots. The casting process will begin and the Bullet Tip Mold will be used to cast a Bullet Tip.
Unlocking[ | ]
Before you can craft a Bullet Tip Mold the recipe must be unlocked, this is done by reading the required recipe book.
Crafting[ | ]
Required Item[ | ]
It is very easy to craft a Bullet Tip Mold and you will require the following items to do so.
5x Lump of Clay- 1x Bullet Tip
Crafting Recipe[ | ]
You can craft a Bullet Tip Mold by using the recipe below.
 1
| ||||||
 1
|
 1
|
1
|
| |||
| 1
|
1
|
1
|
||||
| Crafting time: 0:05 | ||||||
Notes[ | ]
- If the mold is removed from the forge during casting it will cause the current part that is being cast to disappear and you will lose the metal already used by it.