| Iron Ingot Mold | |
|---|---|
| |
| Basic Information | |
| Removed: Alpha 13 | |
| Group | Forging/Molds |
| Category | Mold |
| Scrapping/Forging Properties | |
| Meltable | No |
| Combustible | No |
Description[]
An Iron Ingot Mold is a craftable item that is used to cast Scrap Iron into Iron Ingots. Due to the fact an Iron Ingot Mold is not affected by durability it will not suffer any damage and last indefinitely. As with all molds it will only accept scrap items with the correct type of base metal, in this case iron. For a current list of all iron based items check the page Scrap Iron. An Iron Ingot Mold cannot be scrapped, dismantled or melted in a Forge.
Usage[]
Along with a source of iron and a Combustible fuel, a Iron Ingot Mold is used by placing it into the Mold slot in a Forge. Once the mold has been placed into its slot the Metal slot will accept items of the correct type of material. Place the metal item you intend to melt into the Metal slot and place your fuel source into one of the three Fuel slots. The casting process will begin and the Iron Ingot Mold will be used to cast an Iron Ingot.
Crafting[]
Required Item[]
It is very easy to craft an Iron Ingot Mold but before being able to do so you will require the following items.
5x Lump of Clay
Crafting Recipe[]
You can craft an Iron Ingot Mold by using the recipe below.
 1
| ||||||
 1
|
1
|
| ||||
| 1
|
1
|
1
|
||||
| Crafting time: 0:05 | ||||||
Notes[]
- If the mold is removed from the forge during casting it will cause the current part that is being cast to disappear and you will lose the metal already used by it.