| Sniper Receiver Mold | |
|---|---|
| |
| Basic Information | |
| Removed: Alpha 13 | |
| Group | Forging/Molds |
| Category | Mold |
| Scrapping/Forging Properties | |
| Meltable | No |
| Combustible | No |
Description[]
A Sniper Receiver Mold is a craftable item that is placed in to a Forge and used to cast Scrap Iron into a Sniper Receiver. Due to the fact a Sniper Receiver Mold is not affected by durability it will not suffer any damage and last indefinitely. As with all Molds it will only accept scrap items with the correct type of base metal, in this case iron. For a current list of all iron based items check the page Scrap Iron. A Sniper Receiver Mold cannot be scrapped, dismantled or melted in a Forge.
Usage[]
Along with a source of iron and a Combustible fuel, a Sniper Receiver Mold is used by placing it into the Mold slot in a Forge. Once the mold has been placed into its slot the Metal slot will accept items of the correct type of material. Place the metal item you intend to melt into the Metal slot and place your fuel source into one of the three Fuel slots. The casting process will begin and the Sniper Receiver Mold will be used to cast a Sniper Receiver.
Unlocking[]
Sniper Rifle Mold Schematic
Crafting[]
Required Item[]
- 5x Lump of Clay
- 1x Sniper Receiver
Crafting Recipe[]
 1
| ||||||
 1
|
 1
|
1
|
| |||
| 1
|
1
|
1
|
||||
| Crafting time: 0:05 | ||||||
Notes[]
- If the mold is removed from the forge during casting it will cause the current part that is being cast to disappear and you will lose the metal already used by it.